Main Features; Set Up Instruction - netvox R718H2 User Manual

3. Main Feature
 Compatible with LoRaWAN
 Pulse state detection
 Simple operation and setting
 Voltage range of external pulse is 2.4v~3.3
 2 ER14505 lithium batteries in parallel power supply (3.6V / section)
 Protection class IP65/IP67 (optional)
 Compatible with LoRaWAN
 Frequency hopping spread spectrum
 Configuration parameters can be configured via a third-party software platform, data can be read and alerts can be set via SMS text
and email (optional)
 Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne
 Low power consumption and long battery life
Battery Life:
⁻
Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html
⁻
At this website, users can find battery life time for variety models at different configurations.
1. Actual range may vary depending on environment.
2. Battery life is determined by sensor reporting frequency and other variables.

4.Set Up Instruction

On/Off
Power on
Turn on
Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till green indicator flashes 20 times
Power off
Note
TM
Class A
Insert batteries (user may need a screwdriver to open)
Press and hold the function key for 3 seconds till the green indicator flashes once
Remove Batteries
1. Remove and insert the battery, and then the device is in off state by default
2. On/off interval is suggested to be about 10 seconds to avoid the interference from
capacitor inductance and other energy storage components
3. In the first 5 seconds after power on, the device is in engineering test mode
3