Protection Against Overheating; Storage; Troubleshooting; Causes Of Malfunction And Fault Rectification - Silvercrest SLE 320 A2 Operating Instructions Manual

Protection against overheating

The appliance has an overheating guard.
■ The overheating guard switches the appliance off automatically if there is a risk
of overheating.
■ For approx. 3 minutes thereafter, the appliance cannot be re-started.
■ After approx 3 minutes, the appliance re-starts automatically.
■ Check whether external factors may have triggered the overheating guard.
(e.g. temperatures above 35 °C or a closed valve

Storage

♦ Remove the mains plug from the mains power socket.
♦ Coil the power cord
plug to the power cord
the cable.
♦ Empty the water tank
♦ Always store the appliance in an upright position and in a dry and dust-free
environment.

Troubleshooting

This section contains important information on fault identification and rectification.
Causes of malfunction and fault rectification
The following Table will help to identify and rectify minor faults:
Fault Possible cause
The mains plug is not plugged in.
The mains power socket is not
supplying power.
The appliance
will not switch
Safety stop due to the water
on.
tank
been inserted incorrectly.
The water tank
The appliance
Room temperature is below 15°C.
stops occasion-
ally (the fan
The humidity in the room is below
switches off).
55%.
│
■ 20 GB
around the cable spool
12
using the securing brace
12
5 if not using the appliance for a prolonged period.
5 being missing or having
is full.
5
obstructing the air outlet).
and secure the mains
11
provided with
15
Rectification
Insert the mains plug into the mains
power socket.
Check the house's mains fuse.
Insert the water tank
5
Empty the water tank
it.
The defrosting function is activated. This
is a normal feature of the appliance.
This is a normal feature of the appli-
ance.
correctly.
and re-insert
5
SLE 320 A2