Registering A Dtmf Code - Yaesu FTM-7250DE Advance Manual

Advanced Operation

Registering a DTMF code

1. Press and hold the [ MHz ( SETUP )] key to enter the
Set mode.
2. Rotate the DIAL knob to select "DT SET 18".
3. Press the [ MHz ( SETUP )] key momentarily, then
rotate the DIAL knob to select the desired memory
channel (C0 to C9) to register the DTMF code.
4. Press the [ V/M ( MW )] key momentarily, then rotate
the DIAL knob to select the first digit of the DTMF
code.
Note: You can also use the keypad on the micro-
phone to input the DTMF code.
5. When you have selected the correct digit, press
the [ V/M ( MW )] key momentarily. Now, rotate the
DIAL knob to select the second of 16 available
numbers in the current DTMF Autodialer memory
register.
6. Repeat this procedure for each digit in the DTMF code.
Note: m To make a correction, press the [ BAND ( SQL )] key to back-space the cursor,
then re-enter the correct number.
m Press and hold the [ GM ( AMS )] key to delete all data after the cursor that may
have been previously stored.
7. When entry of all digits is complete, press and hold the [ MHz ( SETUP )] key to set the
DTMF code and exit to normal operation.
14