Dcs Operation - Yaesu FTM-7250DE Advance Manual

Advanced Operation

DCS Operation

This radio is equipped with a DCS (Digital Coded Squelch) function that allows audio to
be heard only when signals containing the corresponding DCS code are received. By
matching the DCS code with the partner stations beforehand, a quiet receive standby is
possible..
Note: DCS does not function in digital mode. To transmit a signal with a DCS code, use
the [ MODE ( DG-ID )] key to switch the communication mode to AMS (Auto Mode
Select function) or analog (FM) mode.
1. Press and hold the [ MHz ( SETUP )] key to enter the
Set mode.
2. Rotate the DIAL knob to select "SQL TYPE 44".
3. Press the [ MHz ( SETUP )] key, then rotate the
DIAL knob to select "DCS".
4. Press and hold the [ MHz ( SETUP )] key to save the
new setting and exit to normal operation.
"DCS" is displayed on the screen. The squelch
opens only when receiving a signal containing the
corresponding DCS code..
Note: From the Setup Menu, you can change the DCS setting.
DCS CODE 10 à The DCS code can be selected from 104 codes.
BELL 7 à A bell tone (beep) may be set to sound when signals containing
a corresponding DCS code are received.
7