MN002347A01-B
Chapter 2: Getting Started
2.11.9
Enabling Cast Screen
When and where to use: Use this procedure to enable the LEX L10i to project the screen to a TV or
other device.
Procedure:
1 From the Home screen, tap
2 Tap
.
3 Tap Display.
4 Tap Cast screen.
5 Tap .
6 Select Enable wireless display.
Return to Process
Setting the Display
on page 55
Related Links
Projecting the LEX Screen on Another Device
2.11.9.1
Projecting the LEX Screen on Another Device
Prerequisites: The Cast screen must be enabled.
When and where to use: Use this procedure to project the device screen on another device.
Procedure:
1 From the Home screen, tap
2 Tap
.
3 Tap Display.
4 Tap Cast screen.
5 Select the device to show your device screen on.
Your device should now display on the other device.
6 To stop projecting your device screen, swipe down from the Status bar and tap Disconnect
under Cast screen.
Return to Process
Enabling Cast Screen
on page 60
2.12
Sound and Notification Settings
Sound and notification settings allow the user to configure default media, alarm, and ring volume levels
and ringtones. The user can adjust notification settings.
60
.
on page 60
.
Send Feedback