Advertisement
Quick Links
Advertisement
Related Manuals for Avaya 16-300310
Summary of Contents for Avaya 16-300310
- Page 1 Avaya Video Conferencing Solutions Quick Setup Release 6.0 16-300310 Issue 1 August 2010...
- Page 2 Units are accessing and using the Software at any given time. A “Unit” means the unit on which Avaya, at its sole discretion, bases the pricing of its licenses and can be, without limitation, an agent, port or user, an e-mail or voice mail account in the name of a person or corporate function (For example,., webmaster or helpdesk), or a directory entry in the administrative...
- Page 3 Avaya support Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Support Web site:...
-
Page 4: Sip Endpoints
Overview This Quick setup guide covers the basic administration tasks to set up SIP and H.323 video endpoints. For detailed information, see Avaya video conferencing Solutions Networking Guide 6.0. This guide is intended for technicians installing the following video endpoints:... - Page 5 Perform a network readiness test or network assessment to ensure your network is ● capable of supporting bandwidth demands of video over IP. Avaya recommends implementing quality of service (QoS) across your network Configuration of SIP video endpoints on Communication Manager 6.0...
- Page 6 ● Note: Modifying the default Priority video option is not necessary. See Note: Avaya video conferencing Solutions Networking Guide 6.0 for further details. AVTS R 6.0 Quick Setup Configuration of SIP video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com...
- Page 7 ● Note: These values are examples only. 1024 allows for 720p High Note: Definition. Higher resolutions require more bandwidth. See Avaya video Conferencing Solutions Networking Guide for further details. Maximum Call Rate for Priority Direct-IP Multimedia: 2048 Kbits ● Note:...
-
Page 8: Creating A Template
® Avaya one-X Communicator video endpoints and users using System Manager Perform the following steps to configure all Avaya Series 1000 Video Conferencing Endpoints ® and Avaya one-X Communicator with SIP video. This section describes how to use System Manager to create an endpoint template and how to add users using these templates. - Page 9 The call appearances must be set to the maximum limit permitted for Note: each endpoint. 2. Select the IP SoftPhone check box for Avaya one-X you select this check box, the title of the check box changes to IP Video SoftPhone.
- Page 10 ● Shared Communication Profile Password : Corresponds to the ● authorization password for the series Avaya Series 1000 Video Conferencing Endpoints and the password for Avaya one-X Assigning an address On the New User Profile page, click the Communication Profile drop-down arrow and under Communication Address click New.
- Page 11 Configuration of SIP video endpoints on Communication Manager 6.0 Extension : same as ext from Template : templatename, where templatename is the name created Table 2: Creating a template Port : IP For feedback, use document@avaya.com Assigning an address in step 2 on page 8 August 2010...
- Page 12 Configuring the Avaya Series 1000 Video Conferencing Endpoints Perform the following steps to configure all Avaya Series 1000 Video Conferencing Endpoints using the IR Remote Control. You can also configure each endpoint using a Web browser. See the Networking Guide for more information. If configuring the endpoint for the first time, you see the initial configuration wizard.
- Page 13 Table 5: Configuring Avaya Series 1000 Video Conferencing Endpoints Enabling SIP protocol Select Communications, click on SIP, and set the following parameters: SIP Username : ext. This parameter is the same as step 1 of ● video users Authorization Name : Same as SIP Username ●...
- Page 14 ● numeric characters and is defined by the System Administrator. The key code that combines the Avaya option with any other Polycom options. ● If the VSX/HDX system has the multipoint option or IMCU option. If so, you must combine ●...
- Page 15 You can create an alias for VSX/HDX stations. Note: Add Users/stations to Polycom endpoints Use this procedure to add users/stations to the Polycom endpoints. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 16 Select the Dynamic Bandwidth check box. From the Maximum Transmit Bandwidth box, select the setting that matches the Maximum Call Rate for Direct-IP Multimedia setting you specified for the Avaya Communication Manager system. From the Maximum Receive Bandwidth box, select the setting that matches the Maximum Call Rate for Direct-IP Multimedia setting you specified for the Avaya Communication Manager system.
- Page 17 Far-end Network Region ● Calls Share IP Signaling Connection: n ● Direct IP-IP Audio Connections: y ● IP Audio Hairpinning: n ● AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 18 Communication Manager system as the primary gatekeeper. Confirm through a status signaling group that the RMX has registered. Create a meeting room to use a test direct dial conference ID. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 19 Enter change cos to set Ad-hoc video Conferencing (page 2 of screen) for the appropriate COS levels. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 Table 8: Configuring Polycom RMX Series Video on page 13 to configure the Polycom RMX system. For feedback, use document@avaya.com August 2010...
- Page 20 Ensure to choose Auto Layout under the video settings. Note: Create the two entry queues (one for Ad-hoc conferences, and one for priority conferences). AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 21 From the Format box, select PCM ● From the Attributes box, select 16.00 kHz, 16 Bit, Mono ● Click OK ● AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 22 System Limit: the total number of video conference ports in your system. (This is ● the sum of Used ports and available ports) AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 23 Enter change node-names ip to add an entry for the Polycom PathNavigator gatekeeper. Be sure to enter the IP address of the IP board for the gatekeeper. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 24 Step 4) to set Trunk Group for Channel Selection to the trunk group you added in Step 5. Create a route pattern to the gatekeeper. Configure the gatekeeper. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0 For feedback, use document@avaya.com August 2010...
- Page 25 Communicator can be configured with either SIP or H.323 protocol. Ensure the check box corresponding to Enable Video is selected on the endpoint. To configure one-X Communicator using SIP or H.323 protocol, see Avaya one-X Guide. AVTS R 6.0 Quick Setup Configure H.323 video endpoints on Communication Manager 6.0...