Siemens LITHOSTAR Multiline Manual page 62

62
7-
6Working on the Motor Drives
The following
general issues
apply:
NOTICE
LITHOSTAR Multiline
No special safety measures are required when working on the X/Y
drives.
Working on the orbital / W drive
When working on the orbital drive, secure the C-arm
against uncontrolled movement. When working on the W
drive, secure the bearing block from backing up into the
mechanical stop.
RXL2-120.841.02.01.02
09.05
Working on the Motor Drives
Page 62 of 72
CS PS 24
Siemens AG
Medical Solutions