Normal Operating Modes; To Cook In Clam Grill Mode; Standby Button - Black; Preheat Mode (Eprom 6.20 And Higher) - Garland MWEFH-9501 Operation Manual

Standby Button - Black

When both "STANDBY" and "CANCEL/RAISE" buttons
are pressed simultaneously, the upper platen will lower to the
griddle surface. Press the "STANDBY" button again within
five (5) seconds from the start of the cook cycle, to place
the controller in its "standby" state. The display will flash
"STANDBY" along with the menu item currently selected.
For energy conservation and periods of non-use this will
maintain grill temperatures.
NOTE - TO STOP THE GRILL AT ANY TIME, TURN THE MASTER

Preheat Mode (Eprom 6.20 and higher)

The first menu item selected after pressing the "MENU
SELECT" button is "PREHEAT". Preheat mode is not
actually a menu item, as it does not have a remove time.
Preheat mode has been designed to alarm the operator when
the grill is "READY TO COOK".
The upper platen set temperature is 425º F (218ºC) and a
lower grill surface set temperature of 350ºF (177ºC). When
the grill reaches these set temperatures, the operator can then
select a menu item with equal set temperatures, and the grill
will be ready to cook.

To Cook in Clam Grill Mode:

1. SELECT a clam grill menu by pressing the "MENU
SELECT" button, until you attain the required Clam
menu item. The display may read either "TOO COOL" or
"TOO HOT," (alternating with the "MENU ITEM"), until
the grill attains the set temperature range for that menu,
then the "MENU ITEM," (only), will be displayed.
NOTE: If the display reads either "TOO COOL" or "TOO
HOT" the upper platen will not lower and initiate a cooking
sequence.
2. After laying product in the prescribed method, press
the GREEN ("CANCEL/RAISE") and the BLACK
("STANDBY") buttons at the same time. An audible alert
will sound and the platen will lower to the preset gap and
the timing will automatically start.
3. When the cook cycle times down to five, (5), seconds
remaining, a pre-time-out alarm will sound to alert the
grill operator.
4. When the cooking time has been completed, the upper
DESCRIPTION OF GRILL CONTROLS

NORMAL OPERATING MODES

POWER SWITCH OFF

Cancel / Raise Button - Green

From the "STANDBY" mode, pushing this button will
cancel "Standby" and raise platen. During the cooking cycle,
pressing this button will cancel the cooking timer and return
the grill to the "IDLE" mode.
NOTE: If the platen is in motion, pressing the "CANCEL/
RAISE" button will stop the platen in motion and return
the platen to the "IDLE" mode (Eprom version 3.52 and
greater).
platen will raise and the display will flash "REMOVE"
with an audible alert, then remove product per the
prescribed method.
5. To cancel a cooking cycle, press the GREEN ("CANCEL/
RAISE") button. The upper platen will rise. The display
will flash "CANCEL" with an audible alert.
NOTE: If the alarm cancel is set to AUTO, the audible alert
will sound five (5) seconds before timing is finished.
-OR-
If the alarm cancel is set to MANUAL, the audible alert will
sound as the timing is finished.

To Cook in Flat Grill Mode:

1. SELECT a flat menu by pressing the "MENU SELECT"
button, until you attain the required menu item. The
display may read either "TOO COOL" or "TOO HOT"
(alternating with the "MENU ITEM") until the grill
attains the set temperature for that menu.
2. After laying product in the prescribed method, press
the GREEN, ("CANCEL/RAISE"), and the BLACK,
("STANDBY"), buttons at the same time, starting the
cooking time countdown.
NOTE: If the display reads either "TOO COOL" or "TOO
HOT" the controller will not initiate a cooking sequence.
3. PERFORM the required functions displayed, i.e.; sear,
turn, to cancel the audible alerts, press the BLACK
("STANDBY") button.
CAUTION: Pressing the GREEN ("CANCEL/RAISE")
button will cancel the cooking cycle, and pressing any other
button on the controller will cancel the alarm.