Troubleshooting - AEG Protect C LCD 6000 (S) User Manual

Table of Contents

Advertisement

7. TROUBLESHOOTING

To check the Event log:
1.
2.
3.
Conditions
Battery mode
Battery (Orange) LED
is On.
1 beep every 4
seconds.
Code:
Battery low
Battery (Orange) LED
is On.
1 beep every 1
second.
Code:
No battery
Fault (Red) LED is
Flash
1beep every 1 second
Code:
By pressing
on the menu of "Event log".
Scroll through the listed events or faults.
The following table describes typical conditions.
Possible cause
A utility failure has
occurred, and the
UPS is in Battery
mode.
168
The UPS is in Battery
mode and the battery
is running low.
56
The batteries are
disconnected.
199
Action
The UPS is powering
the equipment with
battery power.
Prepare your
equipment for
shutdown.
This warning is
approximate, and the
actual time to
shutdown may vary
significantly.
Depending on the
UPS load and number
of Extended Battery
Modules (EXTERNAL
BATTERY MODULE s),
the "Battery Low"
warning may occur
before the batteries
reach 20% capacity.
Verify that all
batteries are properly
connected.
If the condition
persists, contact your
service
representative.
53

Advertisement

Table of Contents
loading

Table of Contents