The machine's location should be carefully chosen because environmental
conditions can affect its performance.
WARNING: Make sure the wall outlet is near the machine and freely
accessible so that in event of an emergency it can be
unplugged easily.
WARNING: Do not put any metal objects or containers holding water
(e.g. vases, flowerpots, glasses) on the machine, a fire
or electric shock could occur.
Caution: Keep the machine away from humidity and dust. A fire or an
electric shock might occur.
Caution: Do not place the machine on an unstable or tilted surface. If it
topples over it could cause injury.
Optimum Environmental Conditions
Temperature:
Humidity:
A strong and level base (a sturdy desk and cabinet etc.).
The machine must be level within 5 mm, 13/64" both front to rear and left to right.
Make sure to locate this machine in a large well ventilated room that has an air
turnover of more than 30 m
Environments To Avoid
Direct sunlight or strong light (more than 1500 lux).
Locations directly exposed to cool air from an air conditioner or heated air from a
heater. (Sudden temperature changes from low to high or vice versa may cause
condensation within the machine.)
Dusty areas.
Places where the machine might be subjected to frequent strong vibration.
INSTALLATION REQUIREMENTS
10 – 30°C, 50 – 86°F
20 – 90% RH
3
/hr/person.
INSTALLATION REQUIREMENTS
9