VTech SIP Contemporary Series User Manual page 17

Mute
Mute the microphone
1. During a call, press MUTE /
• The MUTE /
the mute function is turned on. You can
hear the party on the other end, but they
cannot hear you.
2. Press MUTE /
conversation.
• The light on the
Message waiting Indicator
When a voice message is received, the Message
Waiting LED on the telephone base flashes.
Hold
To place a call on hold
During a call, press the HOLD key on the
telephone base to place that call on hold.
To take the call off hold
SPEAKER key on the telephone
Press hook or
base or lift the corded handset if it is on hook.
Transfer a call
1. During a call, press FLASH key to put the
current call on hold.
2. When you hear a dial tone, dial the number
you want to transfer the call to.
3. When you hear the ringing tone or the call
is answered, place the corded handset
back in the telephone base. Then the call
is transferred.
USB port
The port on the side of the telephone base
can be used for charging devices (up to 500mA
@ 5V). Charging will be suspended when there
is an incoming call or the telephone is in use.
.
key illuminates when
again to resume the
key turns off.
EN - 17