Sip 1-line hidden base with cordless color handset and charger, sip 1-line hidden base, 1-line cordless color handset and charger, 1-line cordless color handset, charger (34 pages)
Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. This product should be installed by a premises, consult your dealer or local qualified technician.
Page 3
instructions. Improper adjustment of plugged into a ceiling, under-the-table other controls may result in damage or cabinet outlet. and often requires extensive work by 19. Use only the power cord and batteries an authorised technician to restore the indicated in this manual. Do not dispose product to normal operation.
Instructions de sécurité importantes Lorsque vous utilisez votre équipement téléphonique, des précautions de base doivent toujours être prises pour réduire les risques d’incendie, d’électrocution et de blessure, notamment les suivantes : 1. Ce produit doit être installé par un technicien place, consultez votre revendeur ou votre qualifié.
Page 5
dommages et nécessite souvent un travail jetez pas les piles au feu. Elles risquent important de la part d’un technicien d’exploser. Vérifiez auprès des autorités autorisé pour remettre le produit en état locales les éventuelles instructions spéciales de fonctionnement. d’élimination. •...
Parts check list Items contained in the corded telephone package: Parts included Model Model name number Telephone base Ethernet with faceplate Corded handset Mounting bracket cable and overlay SIP 1-Line corded CTM-S2212 hotel telephone EN - 7...
Telephone layout SIP contemporary 1-line hotel telephone CTM-S2212 VOLUME + RJ-45 LAN port Message Waiting LED VOLUME - RJ-45 COMPUTER port SPEAKER key /USB CHARGE ONLY HOLD key (USB port for charging only) LINE key Wall mount clip Speed Dial keys REDIAL key FLASH key MUTE key...
Installation SIP contemporary 1-line hotel telephone CTM-S2212 Telephone base installation Installation option - desktop position 1. Turn the telephone base over with the bottom side facing up. Connect the coiled handset cord to the telephone base. Coiled handset cord jack 2.
Page 10
4. Once installed, the telephone begins a four-step initialization and system registration process. (1) The MUTE key and SPEAKER turn on and then go off. (2) The MUTE key flashes. (3) The MUTE key stops flashing and then SPEAKER flashes. (4) The MESSAGE WAITING LED, LINE, MUTE and SPEAKER illuminate for 500ms when initialization and system registration are successful.
Page 11
SIP contemporary 1-line hotel telephone CTM-S2212 Telephone base installation Installation option - wall mount position To mount the telephone base on the wall 1. Unplug the Cat-5 network cable from the network wall jack. 2. Remove the corded handset from the telephone base if it is cradled in the telephone base. On the telephone base, place a coin in the slit of the wall mount clip and rotate a half turn (180 degrees).
Telephone settings SIP contemporary 1-line hotel telephone CTM-S2212 All telephone settings are programmed through the administrative web portal. Please refer to the SIP Phone Configuration Guide for details. EN - 12...
Telephone operation SIP contemporary 1-line hotel telephone CTM-S2212 Switch a call between the corded Using the corded handset and the telephone base handset and the telephone base The corded handset and the telephone base • To switch a call from the corded handset to speakerphone cannot be used at the same the telephone base speakerphone, press time.
Page 14
Call waiting Transfer a call 1. During a call, press the FLASH key to put the 1. When you hear a call waiting tone during a current call on hold. call, press the FLASH key on the telephone base to put your current call on hold and 2.
Appendix Troubleshooting If you have difficulty with the telephones, please try the suggestions below. For customer service, visit our website at www.vtechhotelphones.com or call 1-888-907-2007. For corded telephone Question Suggestions • Make sure a Cat-5 network cable is plugged into the LAN port of the telephone base and the network wall jack with Power over Ethernet (PoE).
Page 16
Question Suggestions • Try all the above suggestions. • A prefix may be required for dialling some internal or external calls • Make sure there is a dial tone before dialling. It is normal if the cordless handset takes a second or two to synchronise with the 5.
Page 17
Question Suggestions • Disconnect the telephone base from the network wall jack and connecta and connect a different working telephone. Check your 8. I hear other calls when using the telephone. server settings. If calls are still not clear, the problem is probably in the wiring or network server.
Product of the VTech Hospitality Limited Warranty same or similar design. Repair or replacement Program of Product, at VTech’s option, is the exclusive remedy. VTech Communications, Inc., the manufacturer of VTech Hospitality Product (“Product”), The limited warranty period for the Product...
Page 19
VTech’s liability to end user hereunder shall covered by a one (1) year warranty only. not exceed the purchase price of the Product. In no event shall VTech be liable for any Except as provided by applicable law, you indirect, special, incidental, consequential, or...
Appendix FCC Part 68 and ACTA Consumer Information FCC, ACTA and IC regulations a. This equipment complies with Part 68 of the FCC Part 15 FCC rules and the requirements adopted This equipment has been tested and found by the Administrative Council for Terminal to comply with the requirements for a Class Attachments (ACTA).
Page 21
Industry Canada VTech Communications, Inc. This product meets the applicable Innovation, 1-888-907-2007 Science and Economic Development Canada technical specifications. for repair or warranty information. If the equipment is causing harm to the telephone The Ringer Equivalence Number (REN) is an...
Disclaimer and Limitation of Liability Avoid water VTech Communications, Inc. and its suppliers Your telephone can be damaged if it gets wet. assume no responsibility for any damage or Do not use the handset outdoors in the rain, loss resulting from the use of this user’s manual.
Telephone base: 152 x 207 x 97 mm (5.98 x 8.15 x 3.82 inches) Corded handset: 210 x 47 x 41 mm (8.27 x 1.85 x 1.61 inches) Manufacturer VTech Telecommunications Limited Address: 23/F Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong...