VTech SIP Contemporary Series User Manual page 16

Operation
SIP Contemporary Petite Corded 1-line
Hotel Telephone with Speakerphone -
S2211-SPK
Using the corded handset and the
telephone base
The corded handset and the telephone base
speakerphone cannot be used at the same
time. However, calls can be switched between
the corded handset and the telephone base
speakerphone.
Receive a call
When there is an incoming call, the telephone
rings. The IN USE light and the MESSAGE
WAITING LED flash.
Answer a call using the corded handset
Lift the corded handset from the telephone base.
The IN USE light illuminates when the phone line
is in use.
Answer a call using the telephone base
speakerphone
On the telephone base, press
key. The SPEAKER key illuminates when in
speakerphone mode.
Place a call
Place a call using the corded handset
Lift the corded handset from the telephone base
or press SPEAKER key. Listen for a dial tone
and then dial the desired number, or press a
Speed Dial key on the telephone base to dial
a programmed number. The
illuminates when in speakerphone mode.
End a call
Place the corded handset in the telephone base
when using the corded handset, or press
SPEAKER key when in speakerphone mode.
Switch a call between the corded
handset and the telephone base
speakerphone
• To switch a call from the corded handset
• To switch a call from the telephone base
• To switch a call from the telephone base
Volume
Listening volume and ringer volume can be
adjusted at the telephone base.
Adjust the listening volume
During a call, press VOLUME+ or VOLUME- to
adjust the listening volume. The next call returns
SPEAKER
to the default listening volume.
Adjust the ringer volume
When the telephone base is idle, press VOLUME+
or VOLUME- to adjust the ringer volume.
Call waiting
1. When you hear a call waiting tone during a
call, press FLASH key to put the current call
on hold and take the new incoming call.
SPEAKER key 2. Press FLASH key or the switch hook rapidly
at any time to switch back and forth between
calls.
EN - 16
to the telephone base speakerphone,
SPEAKER key on the telephone
press
base, then place the corded handset on
the telephone base cradle.
speakerphone to the corded handset
currently on the telephone base cradle,
lift the corded handset from the telephone
base cradle .
speakerphone to the corded handset
which is not on the telephone base cradle,
SPEAKER key on the telephone
press
base.