4. Troubleshooting
USB-OTG
1) Device Connect Method
•
Connect to Printer using USB (OTG) cable.
•
Press 'USB OTG)' after 'printer is connected' message at the top of screen.
2) Confirm USB Authority
•
Press 'OK' when pop-up occurs. Once SPDS has connected you can see User Information Consent Screen.
Without Connection
1) Device Connect Method
•
Press 'Without Connection'.
•
Need no connection to device 'Approval process of user information' is omitted.
2) Initial Screen
•
-You can see initial screen does not include any device information.
4-233
Copyright© 1995-2017 SAMSUNG. All rights reserved.