Table of Contents
Advertisement
4. Troubleshooting
► Error Code
S2–33xx
S2–34xx
► Error message
Engine is power save
Supplying and mixing toner to developer unit. Please wait...
Calibrating image density. Please wait...
► Symptom
These error show the engine status.
► Troubleshooting method
1) Wait until error will be disappeared.
► Error Code
S2–4210
► Error message
Front door is open. Close it.
► Symptom
Front cover or Side cover is opened.
► Troubleshooting method
NOTE
To see the troubleshooting video for this error, click through to the link below.
(http://tsp.samsung.com/tsp_file/spds/samsungprinter/K7/Webview/EN_K7_S2-4210.html)
1) Close the front cover correctly.
2) Check if the cover open sensor connector is connected properly. Reconnect it.
3) If the sensor is defective, replace it.
4-153
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
