Table of Contents
Advertisement
Control Panel
Settings
The appliance (temperature) is controlled steplessly (90°C to 180°C), using the
power output controller.
Switching-On
1. Connect the appliance to the power supply.
EN
2. Set the power controller by turning it clockwise to the required temperature.
The temperature may be set within the range of 90 °C – 180 °C.
While heating up the orange heating indicator light will come on, and will go off
when the preset temperature is reached.
When the temperature in the basin drops the red indicator light comes on again and
the device heats again.
3. For best results, wait until the device reaches the desired temperature and then
place food products in the frying basin in the chamber.
CAUTION!
Do not use frying oil / fat in cubes (blocks) for an extended period of time
in too low a temperature, as they cease to be suitable for use.
In the case of longer interruptions between the frying processes, set the
power controller to lower value.
24 / 30
Operating Instruction
Fig. 3
284910
Advertisement
Table of Contents
