Original instruction manual Safety ......................2 Explanation of Signal Words ..............2 Safety instructions..................3 Residual Risks ..................7 Personal Protective Equipment ..............9 Intended Use ..................10 Unintended Use ..................10 General information ..................11 Liability and Warranty ................11 Copyright Protection ................
Safety Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Infor mationsquelle und N achschl agewer k. Di e Kenntnis aller enthaltenen Sic herheits hinweis e und H andlungs anweisungen schafft die Vorauss etz ung für das sichere und s ac hger echte Ar beiten mit dem Gerät. D arüber hi naus müs sen die für den Ei ns atz ber eic h des Geräts geltenden ör tlichen Unfall verhütungs vorsc hriften und allgemeinen Sicherheits besti mmungen eing ehalten wer den. Dies e Bedi enungs anleitung is t Bes tandteil des Produkts und muss i n unmi ttelbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritte Pers on weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Safety WARNING! The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided. CAUTION! The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided. , di e IMPORTANT! The signal word IMPORTANT indicates possible property damages,...
Page 6
Safety • Always completely unwind the power cord. • Never place the appliance or other objects on the power cord. • Always take hold of the plug to disconnect the appliance from the power supply. • Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged.
Page 7
Safety • Surfaces of the appliance become hot during operation. Burning hazard! High temperature remains for some time after switching the appliance off. • Do not touch any hot surfaces of the appliance. Use the provided handling elements and holders. •...
Page 8
Safety Improper Use • Unintended or prohibited use may cause damage to the appliance. • The appliance may only be used when its technical condition is flawless and allows for safe operation. • The appliance may only be used when all connections are executed according to rules of law in force.
Safety Residual Risks Residual risks Hazardous situation Warning Slipping and falling The user may slip on the floor Wear non-slip protective hazard due to the presence of water or footwear when using the dirt. appliance. Burns and scalding The operator intentionally touches the appliance.
Page 10
Safety Residual risks Hazardous situation Warning Chemical materials The operator is handling Take appropriate chemicals (e.g.: cleaning agents, precautions. Always descaling agents, etc.). follow the instructions on the safety data sheets and labels of the products used. Use personal protective equipment recommended in safety data sheets.
Safety Personal Protective Equipment Respiratory Safety Safety Hearing Head Gloves Eye protection tract clothing footwear protection protection protection Phase Transport Moving Unpacking Assembly Standard usage X (*) Settings Standard cleaning Special cleaning Maintenance X (*) Dismantling Disposal Personal protective equipment provided Personal protective equipment is available or must be used if required Personal protective equipment not provided...
Safety Intended Use As described below, every use of the appliance for a purpose differing and/or diverging from its intended standard use, is prohibited and considered to be an unintended use. The following is an intended use: – Deep fat frying of adequate food products. Unintended Use An unintended use may lead to personal injuries or property damages caused by hazardous voltage, fire or high temperature.
General information General information Liability and Warranty All information and instructions in this instruction manual account for legal regulations in force, current level of technical engineering knowledge as well as our expertise and experience, developed over the years. If special models or additional options are ordered, or state-of-the-art technical solutions were implemented, the actual scope of delivery of the appliance may, in some circumstances, differ from descriptions and numerous drawings in this instruction manual.
Transport, Packaging and Storage Transport, Packaging and Storage Delivery Check Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint.
Technical Data Technical Data Version / Characteristics • Operating mode: electric • Equipment connection: 3 NAC – Material: Scotch-Brite polish • Heating element: – stainless steel – can be pivoted out • Cold zone • Grease drain tap • Safety thermostat •...
Technical Data Technical Specifications Name: Deep fat fryer 700FX-E1110 284910 Art. No.: Material: CNS 18/10 Number of slits: Tank volume, in litres: Basin dimensions (W x D x H), in mm: 210 x 405 x 185 Number of baskets: Basket volume, in l:...
Page 17
Technical Data Name: Deep fat fryer 700FX-E2100 284921 Art. No.: Material: CNS 18/10 Number of slits: Tank volume, in litres: Basin dimensions (W x D x H), in mm: 210 x 405 x 185 Number of baskets: Basket volume, in l: Basket dimensions (W x D x H), in mm: 170 x 305 x 115 Temperature range, min.–max., in °C:...
Technical Data List of Components of the Appliance 284910 Fig. 1 1. Ventilation chimney 2. Lever for lifting the heater 3. Bracket for hanging the deep frying 4. Heating element basket 5. Housing 6. Power output controller 7. Heating control light (orange) 8.
Page 19
Technical Data 284921 Fig. 2 1. Ventilation chimney 2. Lever for lifting the heater (2x) 3. Bracket for hanging the deep frying 4. Heating element (2x) basket (2x) 5. Housing 6. Power controller (2x) 7. Heating control light (orange) 8. Safety thermostat (2x) 9.
Installation Instructions Functions of the Appliance The deep fat fryer is used to fry suitable food products in hot fat at a suitable temperature setting. The deep fat fryer — being a robust tabletop appliance — is perfectly adapted to using especially i professional kitchens, foremost, thanks to 10- litre basin.
Page 21
Installation Instructions Unpacking / Positioning • Unpack the appliance, remove all external and internal packaging elements and shipment safeguards. CAUTION! Choking hazard! Prevent children from accessing package materials, for instance: plastic bags and EPS. • If the appliance is covered with a protective film, remove it. Remove the film slowly, so no glue residues are left.
Page 22
Installation Instructions Connection — Electrical Power • Verify if the technical specification of the appliance (see the rating plate) corresponds to the characteristics of the local electric mains grid. • The power cord should be laid in a way preventing anyone from threading on it or tripping against it.
Operating Instruction Operating Instruction • Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er between the heating element and l eft- over food tray. Ostrożni e osadzić s krz ynkę roz dzi elczą z elementem grzewcz ym na tylnej kr awędzi urz ądz enia. Sworz eń w dol nej częś ci s krz ynki r ozdzielcz ej musi wc hodzić w otwór w urzą dz eni u głównym. W taki s posób s krz ynka r oz dzielcz a j est pr awidł owo us tawi ona. WARNING! Fire hazard! Operation of the appliance with the oil level below MIN mark may lead to...
Page 24
Operating Instruction Before placing the lid, make sure that it is dry, so that no water drips into the tank. When pouring hot frying oil / fat in cubes (blocks) be aware of the risk of burns. Cool the frying oil / fat in cubes (blocks) before pouring. CAUTION! The deep fat fryer can only be used by individuals who have been instructed in the proper use of the appliance and hazards that may arise...
Page 25
Operating Instruction Appliance Preparation 1. Remove the equipment from the device (lid, deep frying basket, sieve for breadcrumb coating). 2. Before use, thoroughly clean the appliance and equipment according to instructions in section 6 'Cleaning'. Then thoroughly dry the appliance and the entire equipment.
Page 26
Operating Instruction Control Panel Fig. 3 Settings The appliance (temperature) is controlled steplessly (90°C to 180°C), using the power output controller. Switching-On 1. Connect the appliance to the power supply. 2. Set the power controller by turning it clockwise to the required temperature. The temperature may be set within the range of 90 °C –...
Page 27
Operating Instruction Deep Fat Frying of Food Products 1. Put the prepared food products in the enclosed deep frying basket. NOTE! In the case of overfilling, the temperature of the frying oil / fat in cubes (blocks) in the basin drops, and food products become very greasy. Never overfill the deep fat frying basket with products.
Page 28
Operating Instruction Exchange and removal of frying oil / liquid fat in cubes (blocks) 1. The frying oil / liquid fat in cubes (blocks) should be replaced regularly when it no longer fulfils legal requirements. 2. After cooling, the frying oil / fat in cubes (blocks) should be drained from the basin via fat drain tap into a suitable container.
Cleaning Cleaning Safety Instructions for Cleaning • Before cleaning, disconnect the appliance from the power supply. • Leave the appliance to cool down completely. • Make sure water does not enter the appliance. Do not immerse the appliance in water or other liquids during cleaning. Do not clean the appliance with a pressurized water jet.
Possible Malfunctions Possible Malfunctions Mögliche The table below contains descriptions of possible causes and solutions to malfunctions or errors during operation of the appliance. When malfunction cannot be removed, contact the technical service. In such a case, provide article number, model name and serial number. These data may be found in the rating plate.
Page 31
Possible Malfunctions Error Possible Cause Solution The power supply indicator The preset Check appliance light is on but despite the temperature has been operation after preset temperature the reached modification of settings heating-up indicator light is Damaged temperature Contact the service controller company Damaged indicator...
Disposal Disposal Electrical Appliance Electric appliances are marked with this symbol. Electrical appliances must be disposed of and recycled in a correct and environmentally friendly manner. You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance.