Table of Contents
Advertisement
Connection — Electrical Power
•
Verify if the technical specification of the appliance (see the rating plate)
corresponds to the characteristics of the local electric mains grid.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
A circuit breaker of sufficient capacity to disconnect all poles from the power
supply must be installed upstream of the appliance, in an easily accessible
place; its contact opening width must ensure complete separation according to
overvoltage category III, in accordance with the installation regulations. The
maximum permissible leakage current of the appliance is 1 mA/kW.
•
Flexible, oil-resistant rubber hoses type H05RN-F or H07RN-F must be used for
connection. Cord cross-section is stated in the technical data table.
•
Connect the power cord to the terminal block according to the wiring diagram
supplied with the unit.
•
Secure the part of the power cord outside the appliance with a metal tube or
rigid plastic hose.
•
In the event of damage to the power cord, have it repaired by the manufacturer,
service company or a professional to exclude any risk.
EN
•
Connect the electrical appliance to a working earthing.
•
Connect the protective conductor to the terminal marked with the earth symbol
next to the input terminal block.
•
Connect the metal structure of the electrical appliance to a protective
equipotential bonding device.
•
Connect the conductor to the terminal marked with the equipotential bonding
symbol on the outside of the bottom of the appliance.
•
This symbol indicates that the appliance must be integrated into the
equipotential bonding system and connected in accordance with applicable
regulations.
•
Do not use the appliance with an external timer or remote control.
20 / 30
Installation Instructions
284910
Advertisement
Table of Contents
