Siruba 700L-BKF1 Instruction Book page 25

提示代碼和錯誤代碼
操作盒用 : / For operation box:
提示代碼 顯示訊息
Tip Code Message
E.01 Motor over current
E.02 Motor over load
E.04 Motor over Voltage.
E.05 Motor,low valtate.
操作盒用 : / For operation box:
錯誤代碼 顯示訊息
Error Code Message
E.11 HMI did not respond
E.12 Needle count no signal
報廢流程
1. 當機器需要被淘汰與報廢時，有
一些基本規則必須採納、遵守以
保護環境及公眾健康。
2. 所有的機器零組件必須依照下列
分類來區分開：
(1) 所有護套、可伸縮軟管及塑膠或
非金屬零件。
(2) 電器零件：開關、照明器具等。
(3) 絕緣材料：石棉、彈性／可伸縮
橡膠片。
(4) 金屬：含鐵金屬、銅、青銅與黃
銅、其他各種金屬。
3. 以此方法，所有材質可以正確的
淘汰，回收再利用或鎔解為可再
使用或再處理而不至於危害環境。
TIP CODE LIST AND ERROR CODE LIST
馬達過電流，請關閉電源，並聯絡維修人員。
Motor overcurrent, please turn off the power and contact
maintenance personnel.
馬達過電流，請關閉電源，並聯絡維修人員。
Motor overcurrent, please turn off the power and contact
maintenance personnel.
馬達過電流，請關閉電源，並聯絡維修人員。
Motor overcurrent, please turn off the power and contact
maintenance personnel.
馬達過電流，請關閉電源，並聯絡維修人員。
Motor overcurrent, please turn off the power and contact
maintenance personnel.
人機無回應，請關電，並檢查人機、電控箱接線是否接觸不良。
If there is no response from the HMI, please turn off the power
and check whether the wiring between the HMI and the electric
control box is in poor contact.
針數計數無訊號，請關電，並檢查電控箱接線是否接觸不良。
There is no signal for pin count, please turn off the power and
check whether the wiring of the electric control box is in poor
contact.
DEMOLITION PROCEDURE
1.When the machine needs to be eliminated and
demolished, certain basic rules must be observed to
protect the environment and public health.
2.All machine componenets must be divided according to
categories as the followings:
(1)All sheathes, flexible hosing and plastic or non-metal
components.
(2)Electricity components: switches, or lighting components.
(3)Insulation materials: rock wool, and flexible rubber strips.
(4)Metals: ferrous metals, copper, bronze and brass,
various.
3.In this way, all materials can be eliminated correctly,
recycled, or melted down for reuse or disposed of so that
they do not harm the environment.
說明
Comment
說明
Comment
19