Safety Precautions - Siruba 700LQ Instruction Book

SAFETY PRECAUTIONS

Danger
An accident means ＂ to cause personal injury or death, or damage to property. ＂
When it is necessary to perform service on electrical parts, be sure to turn the power off and wait for 5 minutes or more
before opening the power cabinet/box in order to avoid electrical shock.
Caution
1. Basic precaution
(1) Read the manual and other papers supplied with accessories of the machine before operation. Keep the manual
and papers at hand for quick reference.
(2) The content of this section includes items which are not listed in the specification of your product.
(3) Always wear safety goggles and gloves to avoid accident caused by parts breakage.
(4) For those who use a heart pacer, please consult the medical specialist first.
2. Safety devices and warning labels
(1) Check to ensure all safety devices are correctly installed in place and properly before operation.
(2) If any of the safety devices is removed for service cause, please be sure to replace it back to position and verify
that is works normally before resuming operation.
(3) Always keep the warning labels adhered on the machine clearly visible. If any of the labels missing or
contaminated, replace with a new one at soon.
(4) Fail to obey instructions above may cause severe injury or death to the operators.
3. Application and modification
(1) It is prohibited to use the machine for any application other than its original intention, or in any manner other than
that prescribed in the instruction manual.
(2) Never modify or alter the machine. Any unauthorized change of the specification will not be covered by the
warranty.
(3) Our company assumes no responsibility/liability to damages, injuries, or death resulting from the machine which
has been modified or altered.
4. Education and training
(1) The plant managers/supervisors are obliged to provide education and training to operators and service
technicians. A good education/training plan not only avoids personal injury but also prevent damage to the
property.
(2) Only a well-trained operator is allowed to operate the machine.
(3) Only a certified technician is allowed to perform service to the machine.
5. Situations that you must turn off the power
Turning off the power: press EMG Stop (if there is one), switch off the power, and remove the power plug from the
outlet.
(1) When there is a failure or abnormality, press EMG Stop (if there is one), switch off the power.
(2) To prevent accident resulting from abrupt start of the machine, before operating the machine, always turn off the
power and switch on again.
(3) When cleaning or inspecting the machine, make sure the machine stops completely after turning off the power.
(4) When performing service (i.e. changing of adjusting any component), make sure the power is off and the
machine stops completely.
viii