Safety Precaution; Work Environment; Safety In Installation - Siruba C007K Manual

1. Safety Precaution:

Please read this manual carefully, also with related manual for the machine
head before use. For perfect operation and safety, installing and operating
this product by trained personnel is required.
When install and operate
This product is designed for specify sewing machines and must not be used for other purposes.

1.1 Work Environment

(1). Power voltage:
Only use Power Voltage indicated on the name plate of the
(2). Electromagnetic pulse interference:
To avoid the false operate, please keep the product away from the high electromagnetic
machinery or electro pulse generator.
(3). Temperature:
a. Please don't operate in room temperature is above 45°C or under 5°C
b. Avoid operating in direct sun light or outdoors area.
c. Avoid operating near the heater.
d. Avoid operating in the area which humidity is 30 % or less and 95% or more, also keep away
dew area.
(4). Atmosphere:
a. Avoid operating in dusty area, and stay away from corrosive material.
b. Avoid operating in evaporate or combustible gas area.

1.2 Safety In Installation:

(1). Motor and control box: Follow the instruction in this manual for correct installation.
(2). Accessories: Turn off the power and unplug the cord before mounting any accessories.
(3). Power cord:
a. Avoid power cord being applied by heavy objects or excessive force, or over bend.
b. Power cord must not set to be near the V-belt and the pulley, keep 3 cm space or above.
c. Check the outlet voltage before plugging the cord, make sure it match the voltage shown on
the name plate of the
※
Attention : If the control box is AC 220V system, please don't connect to the
i
70M Servo Motor, precaution must be taken as the following.
:
Interference
i
70L in ±10 % ranges.
AC 380V power outlet, otherwise the error code
occur. If that happened, please turn off the power switch
immediately and check the power voltage. Continue supply the
380V power over 5 minutes might damage the fuses (F1,F2) and
burst the electrolytic capacitors (C3,C4) of the main board and
even might endanger the person safety.
i
70M in ±10 % ranges.
Keep away
1
will
.