Preface; Safety Instructions; Control Box Technical Index - Siruba DL7300 Manual

Please keep this instruction manual for easy reference.
●Preface
Thank you for purchasing this product, In order to make use of product better, Before
installing and testing, please read the operating instructions and the sewing equipment
specification carefully, to use correctly, and be installed and tested by professionals.
Note:
This product is only applicable to the specified range of sewing equipments, please do not use for
other purposes.
Our company has the right of final interpretation of this manual.
If there is any doubt when using product or any comments or suggestions of our products and
services, please feel free to contact us!
Due to upgrade products, features and specifications are subject to change without notice.
The usage of the operating instructions:
The operating instructions provide guidance information based on user's requirements.
The information involves equipments and other usage occasions, transportation, installation, use
and maintenance.
The operating instructions are intended for users and technical staff.
●Safety Instructions
(1) Make sure that the controller switch button is off before plugging in power.
(2) Make sure that all the motor connector cord is plugged in before the switch button turn on,
otherwise it will be an error.
(3) Connecting plug is one to one, be sure to match each other when make connection. Do not be
excessive force when inserting to avoid damage to the system.
(4) The motor lines do not be pressed or excessive distortion, to avoid damage to the signal line
connectors.
(5) Do not disassemble the controller without professionals, to avoid accidents.
Caution: Inside of the controller and interface wire are with strong power, please do not touch, in
order to avoid an electric shock!

Control box technical index

●
Controller type
Working voltage
Rated power
Motor torque
Motor speed
Split M-6SD2

AC 220V 20% 50/60HZ
550W
≤ 3 N·M
200rpm ~ 6000rpm
26
7300DP

AC 220V 20% 50/60HZ
550W
≤ 3 N·M
200rpm ~ 4500rpm