Compass Calibration - C-Fly Faith2 Pro Operation Manual

Flight
71

5. Compass calibration

The aircraft has a built-in compass that ensures that the aircraft maintains an accurate heading
during intelligent flight. The compass status must be checked before each flight. If encounter
the following situations, please calibrate the compass:
1) Before the flight to a new flight site.
2) When the aircraft status indicator shows that the compass has errors.
3) When the APP and the aircraft remind to calibrate the compass.
4) When the aircraft experiences severe shifting during hovering or flying.
Compass calibration via APP
(1). Enter calibration mode:
When aircraft and APP connected, Choose 'aircraft—operation interface----setting---aircraft
setting' click ' ' sensor calibration-- compass calibration.
(2). Compass calibration:
When the APP pops up a prompt, check the current environment and keep away from metal
objects as prompted. Then tap the 'calibration' button,In this case, when the status indicator
on the rear arm of the aircraft flashes blue and red alternately, the compass calibration mode
starts.
Horizontal calibration :
When the APP prompts to rotate the aircraft horizontally, place the aircraft horizontally in the
hand, then turn the aircraft horizontally until the status indicator on the rear arm of the aircraft
changes to an alternatively flashing red and green light, which means that the horizontal
calibration is successful.
Horizontal calibration
Copyright 2022 C-Fly all rights reserved