Introduction; First Use - C-Fly Faith2 Pro Operation Manual

Product Overview
42

1. Introduction

Faith2 Pro is equipped with a vision positioning and GPS positioning system, which allows it to
fly and hover stably indoors and outdoors, and has functions such as one-key RTH, circle mode,
follow me, and waypoint flight, etc. Faith2 Pro is equipped with a 3-axis mechanical stabilization
gimbal to capture high-resolution pictures and videos. It can adjust the camera angle during
flight to capture unique photos and videos from different angles for better aerial photography
experience.
Faith2 Pro can be used with remote controller and APP to realize various operations and
settings of the aircraft and camera. The APP on the phone can display real time high-definition
FPV (first-person view) and information like flight parameters at the same time. Using 'rocket,
dronie, helix, boomerang' mode to get the small unique video easily.
The maximum speed of the aircraft is 50km/h, the maximum transmission distance approach
6000m.the maximum flight time approach 32mins.

2. First use

1) Prepare the aircraft
(1). Unfold the aircraft
The aircraft is folded inside the package. Follow the steps to unfold the aircraft.
a).Extend the front and rear arms outward.
(2). Remove the gimbal cover
(3). Micro SD card installation
The micro SD card slot is located on the right side
of the aircraft body.
Before installing the micro SD card, open the
micro SD card slot cover as shown on the picture,
then insert the Micro SD card into the slot, and
confirm that the micro SD card is in the right
place, then close the micro SD card slot cover.
Note: Please use micro SD card with above or UHS-1 rating.
Attention: Do not install or remove the micro SD card while the aircraft is powered on. Otherwise,
errors will occur for the data stored.
Copyright 2022 C-Fly all rights reserved
b). Separate the propeller blades.