Remote Controller Diagram - C-Fly Faith2 Pro Operation Manual

Product Overview
46

6. Remote controller diagram

a
b
e
h
i
j
a Gimbal adjustment
Control the angle of the camera.
b Photo button
Press to take a picture.
c Video button
Press to start/stop recording the video.
d USB port
For charging.
e Antenna
f Connection status indicator
When the green light is always on, the aircraft is
connected, and when the red light is always on,
the aircraft is not connected.
g Power indicator
h Zoom button
Press and hold this button and pull out a
at the same time to adjust the zoom of the
camera, and the picture will be enlarged or
reduced accordingly.
i Data wire port
Connect the RC and phone.
d
f
m n
Copyright 2022 C-Fly all rights reserved
g
o
j Left joystick
k Power switch
Short press: check the battery power,Long
press: turn on/off the remote controller.
l Right joystick
m One key takeoff / landing
Press this button before takeoff, and the
aircraft will takeoff automatically;
Press this button after takeoff, and the aircraft
will land automatically.
n Sport mode switch
When it's off, aircraft is normal speed mode .
When it's on, aircraft is high speed mode,
please fly carefully.
o RTH / Pause button
Long press over 1.5seconds,aircraft will start
RTH mode,short press this button, aircraft
will stop intelligent mode(except low battery
return),and hover.
c
e
k
l