C-Fly Faith2 Pro Operation Manual page 72

68 CFLY2 APP
2) Obstacle avoidance function setting
Click the " " icon to enter the "obstacle avoidance function setting" interface as shown below,
where the obstacle avoidance function can be turned on or off.
3) RC setting
Click the " " to enter "remote control settings" interface as shown below.
a Gimbal wheel sensitivity
b Pair RC and aircraft:
Pair the remote control. Refer to the relevant
instructions for its functions.
c Normal mode maximum speed setting:
Customized the maximum turning, horizontal
4) Battery settings
Click' ',enter battery setting interface,set rest battery capacity to alarm,the value is from
10%~80%, when battery of aricraft is lower than the value,the indicator of aircraft turn to
flashing red,meanwhile,aircraft will return to home and land.
5) Other settings
Click " " icon to enter "other settings" interface as shown below.
a Find the aircraft
Find the lost aircraft through the navigation
function.
b Auxiliary gridlines
It is used for the composition calibration of
d Gimbal upward angle:
Copyright 2022 C-Fly all rights reserved
flight, ascending and descending speeds of the
aircraft.
When on, the camera can be operated up to 20
degrees horizontally.
picture viewfinder.
c Voice broadcast switch
d Version information
Display version information.
a
b
c
d
a
b
c
d