Table of Contents
Advertisement
Safety Summary
The following general safety precautions must be observed during all phases of operation,
service, and repair of this instrument. Failure to comply with these precautions or specific
WARNINGS given elsewhere in this manual will violate safety standards of design,
manufacture, and intended use of the instrument. Chroma assumes no liability for the
customer's failure to comply with these requirements.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the device in the presence of flammable gases or
fumes.
BEFORE INSTALLING THE BATTERY
Check whether the battery voltage meets the rated voltage input
range of the device.
BE SURE TO POWER OFF THE DEVICE AND REMOVE THE
TEST CABLE BEFORE OPENING THE CASE
DO NOT REMOVE THE DEVICE CIRCUIT PARTITION
The operator is prohibited to remove the device circuit partition.
Only qualified maintenance personnel can replace the parts and
perform internal adjustments.
vii
Advertisement
Table of Contents
