Advertisement
Quick Links
SUMAKE
Push Or Push And Trigger To
Start Positive Air Screwdriver (Alu.)
Test result according to
Vibration
MODEL
EN ISO 28927-2
Load: 0.9 m/s 2
APS39
Load: 0.4 m/s 2
APS48
Load: 0.4 m/s 2
APS58
Uncertainty K= 1.5 m/s²
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
.
PNEUMATIC TOOLS
EN ISO 11148-6:2012
Noise : EN ISO 15744
Sound pressure level
73.6 dB(A)
77.7 dB(A)
77.8 dB(A)
Uncertainty K= 3dB
Sound power level
1- Read this manual and understand
84.6 dB(A)
88.7 dB(A)
2- Wear an approved ear-protector
88.8 dB(A)
Safety Instructions
Warning
all safety instructions before
operation the tool.
and gloves while operating tool.
APS39(48)(58)-S-2111D-MIF
Advertisement
Related Manuals for Sumake APS39
Summary of Contents for Sumake APS39
- Page 1 77.7 dB(A) 88.7 dB(A) 2- Wear an approved ear-protector and gloves while operating tool. Load: 0.4 m/s 2 APS58 77.8 dB(A) 88.8 dB(A) Uncertainty K= 1.5 m/s² Uncertainty K= 3dB APS39(48)(58)-S-2111D-MIF SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： TRIGGER TO START POSITIVE AIR SCREWDRIVER(ALU.) Model/ Serial No.： APS39(48)(58) to which this declaration applies, complies with these normative documents: ... -
Page 3: Air Supply
Torque Speed Pressure Capacity hose bore Consumption Lever Model No. (soft joint) ±2dBA mm Kg/cm² r.p.m. /min APS39 1,600 0.60 0.28 APS48 1,700 0.84 0.55 APS58 0.84 0.55 13.0 OPERATIONS 1. Precision adjustment has been made around case, gear and rotating section. - Page 6 APS58 PUSH OR PUSH AND TRIGGER TO START POSITIVE AIR SCREWDRIVER (ALU.) APS58-P-1209B-MI...
-
Page 7: Parts List
APS58 PUSH OR PUSH AND TRIGGER TO START POSITIVE AIR SCREWDRIVER (ALU.) PARTS LIST No. Parts No. Description Q'ty No. Parts No. Description Q'ty 5L2034 Pistol Housing (Sky Blue) 3A5238 Clutch Housing 7Q2008 O Ring 36-1 2Q2003 O Ring 2C2003 Blank Cap 3S7042 Anvil... - Page 8 SCREWDRIVER Original instructions SUMAKE Industrial Co. Ltd.
- Page 9 Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 10 2. While using an assembly power tool for threaded fasteners, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks, which can help avoid discomfort and fatigue. 3.
- Page 11 General preparation and connection: When using brand-new air hose or air pipe. Blow and clean the inside of air hose or pipe before installation. Keep inside of air hose or air pipe clean to prevent airdrop problem caused by the lots of drain and dust accumulated and possibly make the inside diameter smaller in the long use.
Need help?
Do you have a question about the APS39 and is the answer not in the manual?
Questions and answers