12. PROPORTION AND OUTPUT ACCORDING TO THE RATIO
PU 3000 PNEUMATIC, AIRMIX® AND AIRLESS VERSIONS
Operating area of the PU 3000 pneumatic, Airmix® and Airless
* Example :
If you want to get a flow rate of 1000cc/min with a proportion of 2/1 (50%), then the P6 parameter
(injection volume of the catalyst) must be adjust between 10 and 20cc.
Nota :
- Tests carried out with same fluid viscosity materials.
The adjustments of pressure and of injection value depend upon the fluid viscosity of the used
material.
- The P6 parameter impacts the mixture, you should confirm this parameter by using the mixture on the
part you want to paint.
SAMES KREMLIN
Page 39
Manual : 573.199.112