Table of Contents
Advertisement
9. APPLICATION PROGRAMMING (F3)
To alter the parameters of the PU 3000, go to F3, then validate. To shift from a parameter to another,
use the arrows
Select the parameter to alter. Depress the key
decrease the value. Activate
To quit a parameter, activate ESC.
To quit the PARAMETERS menu, activate ESC.
The parameters are pre-set up in the factory. They must be adjusted (by an authorized person) to suit
the material to be processed.
The calibration of the stroke length is carried out in the factory. When removing the movement
sensors or when disassembling the fluid section from the motor, it is important to initialize the pumps
(refer to Validation of the initialization mode, page 25).
PASSWORD
When you start the machine for the first time the access code of the menu `Parameters' is
deactivated, everyone is able to modify the machine's parameters.
To activate this access code you have to :
- enter in the parameter 0 of the menu F3 :
''
The code
- change the code by using the arrows
this code.
Once the access code was validated, the access is protected by the password. Only the people
who know this password and those which know the administrator code
reach the menu `Parameters'.
Each time a user wants to enter in the menu 'Parameters' the password will be required:
. The user shall enter the password by using the arrows
each digit which compose this code :
- If the entered code is correct, the following fonts
- If the entered code is incorrect, the word '
the password again (Press 'Esc' to return to the principal menu).
If you want to desactivate the password, you just have to parameterise the code
as access code.
PROCEDURE TO GET THE VERSION NUMBER OF THE ELECTRONIC CARD
- Switch off the unit.
OK
- Input
.
- Switch on the control box : the version number is displayed.
OK
- Release
SAMES KREMLIN
.
or
OK
to validate the new value or ESC to cancel.
appears, it's the code present by default in the machine.
to start the machine out.
OK
, then the arrows
« key
or
and the «key
appear.
appears and the machine allows you to enter
Page 22
or
to increase or
»
« key
» for each digit which compose
''
will be able to
or
and the «key
''
Manual : 573.199.112
».
» for
again
Advertisement
Table of Contents
