Downloading Data From Pu 3000 To A Computer - SAMES KREMLIN PU3000 2L 53/1 Translation From The Original Manual



DOWNLOADING DATA FROM PU 3000 TO A COMPUTER

Preamble / "Hyper Terminal" issue
This application is necessary. Two cases are to be considered :
.PC under Windows XP/Vista/2000,
.PC under Windows 7.

With Windows XP/Vista/2000, "HyperTerminal" application is available with the following path
:
>
Menu Start

With Windows7, you will need to download freeware "HyperTerminal" from some website.
For example :
http://www.01net.com/telecharger/windows/Bureautique/telephonie/fiches/5829.html
Once it is downloaded and installed, carry out a simple test of opening and closing.
It should look like this whenever open :
Switching of the control box

Switch the control box.

Link a "RS232 male / USB male" cable to the plug located below the Micro back frame, the
other end to the USB plugs on the computer. Cable not supplied by KR.

According to the USB plug used a "port com" number appears in the "device manager" screen
(Menu Start > Control panel > Device manager).
SAMES KREMLIN
>
All programs Accessories
Page 29
> >
Communications HyperTerminal
Manual : 573.199.112