Figure 104. Removing the cooling fan cage board.
Next steps
Replace the cooling fan cage
Installing the cooling fan cage board
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the following components:
a.
Air shroud
b.
Cooling fan cage assembly
4. Disconnect cables from the fan board.
Steps
1. Align and lower the fan board with the screw holes in the system.
2. Using a Phillips #2 screwdriver. tighten the screws that secures the fan board to the system
board.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
105