Installing The Cooling Fan Cage Board - Dell EMC PowerEdge R550 Installation And Service Manual

Figure 102. Removing the cooling fan cage board.
Next steps
Replace the cooling fan cage

Installing the cooling fan cage board

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the following components:
a. Air shroud
b. Cooling fan cage assembly
4. Disconnect cables from the fan board.
Steps
1. Align and lower the fan board with the screw holes in the system.
2. Using a Phillips #2 screwdriver. tighten the screws that secures the fan board to the system
board.
Safety instructions.
Before working inside your system.
Installing and removing system components 103