Control Panel; Removing The Left Control Panel - Dell EMC PowerEdge E75S Series Installation And Service Manual

Control panel

This is a service technician replaceable part only.

Removing the left control panel

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
4. Remove the drive backplane
5. Remove the cooling fan cage
Steps
1. Disconnect the control panel cable from the system board connector.
NOTE: Observe the routing of the cable as you remove it from the system.
2. Using the Phillips #1 screwdriver, remove the screws that secure the cable cover and left control panel assembly to the
system.
3. Remove the cable cover away the system.
4. Holding the left control panel assembly , remove the control panel along with the cable from the system.
Figure 109. Removing the left control panel
Next steps
Replace the left control panel.
Safety instructions.
Before working inside your
cover.
assembly.
system.
Installing and removing system components 111