Table of Contents
Advertisement
Figure 74. Removing the BOSS S2 card carrier
3. Using the Phillips #1 screwdriver remove the M3 x 0.5 x 4.5 mm screw that secures the M.2 SSD to the BOSS S2 card
carrier.
4. Slide the M.2 SSD out from the BOSS S2 card carrier.
Figure 75. Removing the M.2 SSD
5. Disconnect the BOSS power cable from the PIB and the BOSS signal cable from the motherboard.
Installing and removing system components
83
Advertisement
Table of Contents
