Operating The On-Board Computer; Opening The Start Screen; Opening The Screens; Opening The Quick Menu - Bosch KB060 KD Series Manual

6.5.17.9 Operating the on-board computer

5
Figure 156: Overview of control panel
Symbol Designation
1 Select button
2 > Forward button
3
< Back button
4 + Plus button
5 Push assist button
6 – Minus button
Table 56: Overview of the control panel buttons
You can use the select button (1) to perform the
following functions:
• Open the Q U I C K ME N U while riding
• Open the SE T TI N G S M E N U on the S TA TU S
S C R E EN while the bicycle is stationary
• Confirm values and accept information
notifications
• Leave a dialogue.
You can use the forward button (2) and back
button (3) to access the different user interfaces
with information on ride values even when riding.
This means both hands remain on the handlebars
while you are cycling.
You can use the plus button (4) and the minus
button (6) to increase and decrease the level of
assistance. You can use the buttons to scroll up
and down a list (such as the S ET TI N G S menu).
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
4 3
2
1
6

6.5.17.10Opening the start screen

 Insert on-board computer into the mount.
 The S TA R T S C R E E N will be shown.
Figure 157: Open start screen

6.5.17.11Opening the screens

 Press the forward button or back button.
 A new screen is displayed.

6.5.17.12Opening the quick menu


You cannot access the quick menu from the start
screen.
1 Open any screen except the start screen.
2 Press the Select button.
 The Q U I C K ME N U is displayed.

6.5.17.13Opening the status screen

1 Open the S T A R T SC R E E N.
2 Press the Back button.
 The S TA T US S C R E EN will be shown.
Operation
136