Accessories; Child Seat - Bosch KB060 KD Series Manual

6.6

Accessories

We recommend a parking stand into which either
the front wheel or rear wheel can be inserted
securely for pedelecs which do not have a
kickstand. The following accessories are
recommended:
Description
Protective cover for electrical
components
Panniers,
system component*
Rear wheel basket,
system component*
Bicycle box,
system component*
Parking stand
universal stand
Table 58: Accessories
*System components are matched to the pannier
rack and provide sufficient stability due to special
transmission of force.
6.6.1

Child seat

WARNING
!
Crash caused by incorrect child seat
The pannier rack and down tube are unsuitable
for mounting child seats and may break. Such an
incorrect position may cause a crash with serious
injuries for the rider or child.
 Never attach a child seat to the saddle,
handlebars or down tube.
CAUTION
!
Crash caused by improper handling
When using child seats, the pedelec's handling
characteristics and stability change considerably.
This can cause a loss of control, a crash and
injuries.
 You should practice how to use the child seat
safely before using the pedelec in public
spaces.
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
Article number
080-41000 ff
080-40946
051-20603
080-40947
XX-TWO14B
CAUTION
!
Risk of crushing due to exposed springs
The child may crush his/her fingers on exposed
springs or open mechanical parts of the saddle or
the seat post.
 Never install saddles with exposed springs if a
child seat is being used.
 Never install seat posts with suspension with
open mechanical parts or exposed springs if a
child seat is being used.
Notice
 Observe the legal regulations on the use of
child seats.
 Observe the operating and safety instructions
for the child seat system.
 Never exceed the maximum permitted total
weight.
The specialist dealer will advise you on choosing
a suitable child seat system for the child and the
pedelec.
The specialist dealer must install the child seat the
first time to ensure that it is safely fitted.
When installing a child seat, the specialist dealer
makes sure that the seat and the fastening
mechanism for the seat are suitable for the
pedelec and that all components are installed and
firmly fastened. They will also ensure that shift
cables, brake cables, hydraulic lines and electrical
cables are adjusted as necessary, the rider has
optimum freedom of movement and the pedelec's
maximum permitted total weight is complied with.
The specialist dealer will provide instruction on
how to handle the pedelec and the child seat.
Operation
140