Bosch KB060 KD Series Manual page 215

9 Pull out the outer sleeve end cap from the
counter support on the Postpin interface on the
seat post.
Figure 213: Pulling the end cap out
Removing the outer sleeve and slide bushing
1 Use a 3 mm hex spanner to remove
attachment screw on the outer sleeve.
2 Detach outer sleeve by pulling upwards with
your hand.
3 Pull slide bushing tube out of the seat tube.
Figure 214: Removing the outer sleeve and slide bushing
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
Caring for the outer sleeve
1 Detach spring washer or outer sealing ring.
Figure 215: Removed spring washer
2 Carefully remove the wiper from the groove.
Figure 216: Removing the wiper
3 Use a small, sharp object to look for and
4 Carefully take out the felt ring.
5 Remove felt ring.
6 Clean or replace felt ring.
Figure 217: Removing the felt ring
7 Clean inside of outer sleeve with a cloth.
Figure 218: Cleaning the outer sleeve
remove the end of the felt ring.
Maintenance
214