Bosch KB060 KD Series Manual page 213

8.5.8.2 by.schulz suspension seat post
Only applies to pedelecs with this equipment
1 Remove seat post from the frame.
2 Remove safety and protective cover.
3 Clean seat post on the inside and outside.
4 Examine seat post rack for scratches, cracks
and breaks.
 Replaced damaged seat post as specified in
the parts list.
 If the paint protection film is missing or has
worn away, affix a new paint protection film.
5 Lubricate screws in the parallel suspension.
6 Reinsert seat post as per height specifications
in the pedelec pass. Check screws for correct
tightening torques.
Tightening torque G1

M8 seat clamping screw
M5 fixing grub screws
Tightening torque G2

M6 seat clamping screw
M5 fixing grub screws
7 Put on safety and protective cover.
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
8.5.8.3 Suntour suspension seat post
Only applies to pedelecs with this equipment
1 Remove seat post from the frame.
2 Remove safety and protective cover.
3 Examine seat post rack for scratches, cracks
 Replaced damaged seat post as specified in
 If the paint protection film is missing or has
4 Undo pre-tensioning adjuster and take out
5 Clean seat post on inside and outside.
6 Grease seat post on inside with SR SUNTOUR
7 Lubricate pressure roller with bike chain oil.
20-24 Nm
3 Nm
 Lubricate articulated joints in parallel
12-14 Nm
3 Nm
Figure 205: SR Suntour suspension seat post lubrication
points
8 Reinsert seat post as per height specifications
9 Check screws for correct tightening torques.

10 Put on safety and protective cover.
and breaks.
the parts list.
worn away, affix a new paint protection film.
steel spring.
no. 9170-001.
suspension with bike chain oil.
in the pedelec pass.
Tightening torque
Seat clamping screw
M5 fixing grub screws
Maintenance
1
15-18 Nm
3 Nm
212