5.3.2
Preparing the battery
5.3.2.1 Retrofitting the PowerTube adapter
Only applies to pedelecs with this equipment
A PowerTube Adapter 400 or 500 needs to be
retrofitted to use a BOSCH PowerTube 625
battery.
1 Use a TORX® T25 wrench to undo the screws
in the battery mount.
Figure 62: Undoing screws on battery mount
2 Use a ratchet to remove the two 4 mm hexagon
screws in the PowerTube adapter. If you don't
have a ratchet, you can use a hexagonal key to
remove the screws.
Figure 63: Removing the 4 mm hexagon screws
MY22K01 - 32_1.0_26.08.2021
All manuals and user guides at all-guides.com
3 Use a ratchet to remove the two 4 mm hexagon
Figure 64: Removing hexagon screws
4 Pull out the PowerTube adapter.
Figure 65: Pulling out the PowerTube adapter
5 Use adapter plates to adjust the distance if
.
Figure 66: Fitted adapter plates
screws in the PowerTube adapter.
necessary.
Assembly
74