Important Instructions Concerning The Wireless System - SMC Networks EXW1-BECAC Operation Manual

Maintenance
•Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release
of air, before performing maintenance.
Otherwise safety is not assured due to an unexpected malfunction or incorrect operation.
•Perform regular maintenance and inspections.
There is a risk of unexpected operation due to malfunction of the equipment.
•After maintenance is complete, perform appropriate functional inspections.
Stop operation if the equipment does not function correctly.
Otherwise safety cannot be assured due to an unexpected malfunction or incorrect operation.
•Do not use solvents such as benzene, thinner, etc. to clean each unit.
These can damage the surface of the body and erase the markings on the product.
Use a soft cloth to remove stains.
For heavy stains, use a damp cloth that has been soaked with diluted neutral detergent and fully squeezed, then
wipe up the stains again with a dry cloth.
Important Instructions concerning the
Wireless System
●Connect the wireless adaptor to this product.
●The wireless adaptor (EXW1-A11*) and the wireless remote (EXW1-RD*) are certified as wireless
equipment in accordance with the Radio Act and the certification of construction type has been
obtained. Customers do not need to apply for a license to use this equipment.
Be sure to comply with the following precautions.
•Do not disassemble or modify the product. Disassembly and modification are prohibited by law.
•Attach and use the supplied antenna set (EXW1-EA1) as an external antenna of the wireless remote
(EXW1-RD*).
The law forbids the use of antennas and coaxial cables that are not sold by SMC.
•This product is compliant with the Radio Act in Japan, European countries and the US. For use in
other countries, please consult SMC. For the latest information, refer to the catalog on the website
below.
URL https://www.smcworld.com
●This product communicates using radio waves, and the communication may be temporarily interrupted
due to the ambient environments and operating methods. SMC will not be responsible for any
secondary failure which may cause an accident or cause damage to other devices or equipment.
●When several units are installed close to each other, slight interference may occur due to the
characteristics of the wireless product.
●Radio waves emitted by this product may adversely affect implantable medical devices such as
implantable cardiac pacemakers and brillators.
For precautions regarding the use of equipment or devices that may adversely affect performance,
refer to the catalog or instruction manuals for the equipment or devices, or contact the manufacturers
directly.
●The communication performance is affected by the ambient environment, so please perform
communication testing before use.
-11-
No.EX※※-OMA1031-B