Replacement Of Batteries In Remote Controller - Toyotomi TKG-628R32 User Manual

Operation guide
1.
After putting through the power, press "ON/OFF" button on remote controller to
turn on the air conditioner.
2.
Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN,
HEAT.
3.
Press " " or "
be adjusted under auto mode).
4.
Press "FAN" button to set your required fan speed: auto, low, medium and high
speed.
5.
Press "SWING" button to select fan blowing angle.

Replacement of batteries in remote controller

1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
NOTICE
window on indoor unit.
The distance between signal sender and receiving window should be no
more than 8 m, and there should be no obstacles between them.
or wireless telephone; remote controller should be close to indoor unit during
operation.
When you do not use remote controller for a long time, please take out the
batteries.
replace batteries.
" button to set your required temperature (Temperature cannot
A 1.5V) dry batteries, and
is no display, please
21
signal sender battery
reinstall
remove
Cover of battery box
GB