Table of Contents
Advertisement
Available languages
Available languages
Introduction for buttons on remote controller
Note:
TIMER ON or TIMER OFF, please adjust the clock time.
After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you do not need this function, please
use remote controller to cancel it.
11
LO K button
Press this button to set clock time. "
"
" or "
" button within 5 seconds to set clock time. Each pressing of "
button clock time will increase or decrease 1 minute. If hold "
seconds later, time will change quickly. Release this button when reaching your
required time. Press "CLOCK" button to confirm the time. "
Note:
The interval between two operation cannot exceeds 5 seconds. Otherwise, remote
controller will quit setting status. Operation for TIMER ON/TIMER OFF is the same.
12
QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display "
"AUTO" signal ) and Quiet mode (display "
signal of "
" displayed), after powered on, the Quiet OFF is defaulted.
Note:
The Quiet function cannot be set up in Fan and Dry mode; Under the Quiet mode,
the fan speed is not available.
when indoor ambient temperature
or quiet mode according to the comparison between indoor ambinet temperature
and set temperature.
Under heating mode: indoor fan operates at notch 3 speed or quiet mode accord-
ing to the comparison between indoor ambient temperature and set temperature.
Under dry, fan mode: indoor fan operates at quiet mode.
Under auto mode: the indoor fan operates at the auto quiet mode according to
actual cooling, heating or fan mode.
13
Wi-Fi button
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is
turned on, the " WiFi " icon will be displayed on remote controller; Under status
of remote controller off, press "MODE" and " WiFi " buttons simultaneously for
1 second, WiFi module will restore to factory default setting.
ff status, you can set TIMER OFF or TIMER ON simultaneously.
≧
" icon on remote controller will blink. Press
" singal) and Quiet OFF (there is no
28℃, indoor fan will operate at notch 2 speed
18
" or "
" or "
" button, 2
" icon stops blinking.
" and
"
GB
Advertisement
Table of Contents
