Operation - Viking E-75 Series Product Manual

When the push button is pressed, the E-75 phone goes off-hook, much like a standard speaker phone.
In the event that the line is busy, the E-75 will hang-up. The E-75 will also automatically hang up on
CPC, silence, busy signal, return to dial tone or time out. If programmed to auto-answer (DIP switch 1
ON), the E-75 will also answer any incoming call.
The E-75 color video camera operates completely independently of the E-75 phone board. With power
supplied to the camera, it will continuously output a video signal.
The E-75 proximity card reader also operates completely independently of the E-75 phone board. When
connected to a Viking ES-1 (or equivalent card reader controller) the red LED will light, indicating the
card reader is powered. The LED will turn off and the transducer will beep indicating a card scan.
A. One or two Viking E-75 Entry Phones Sharing a Single Phone Line with Optional
Call Forwarding, Keyless Entry and Doorstrike/Gate Control
120V AC
13.8V AC
Adapter
included
C.O. / Phone
Line Input
Analog Trunk / Line Input
of a Phone System
OR
Standard
Analog Phone(s)
Entry Phone 1
E-75-BK shown
10

Operation

Applications
VIKING
©
VIKING
ELECTRONICS
HUDSON, WI 54016
ADVANCED 2 DOOR ENTRY PHONE
CONTROLLER WITH CALL FORWARDING
1 2 3 4 5 6 7 8 9 10 11 12
MODEL C-500
+
13 14 15 16 17 18 19
R R
E E
X X
1 2
Entry Phone 2
E-75-SS shown
120V AC
Magnetic Lock 1
Model C-500 (not included)
For more information on
the C-500, see DOD# 177.
Contol Output to
SLP-1 or SLP-4
5A@30VDC/
120V AC
250VAC max
(Power typically
not required for
gate controllers)
Door Strike /
Magnetic Lock 2
Dip switch 3
to OFF
5A@30VDC/ 250VAC max
(Power typically not required
for gate controllers)
Door Strike /