Table of Contents
Advertisement
Quick Links
Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Provide Reliable and Intelligent
The E-30 and E-32 handsfree phones are
designed to provide quick and reliable
handsfree
communication
connected directly to a C.O. line or analog
PABX/KSU station.
The E-30 and E-32 feature non-volatile
memory, built in dialers, and intelligent call
progress detection for automatic hang-up when
a call is completed. They can be programmed
to dial up to 5 different numbers on ring no
answer or busy and can be configured to dial
these numbers until answered.
Models E-30-EWP and E-32-EWP add Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed
to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy
on-site programming. For more information on Enhanced Weather Protection, see DOD 859.
Features
• Automatic Noise Canceling (ANC) feature for clear audio - even in noisy
environments
• Vandal Resistant Features: 14 gauge louvered 316 brushed stainless steel
faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty
metal "Call" button and T-10 Torx security mounting screws and drive bit
• Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws
and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-
draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant
powder paint on optional VE-5x5 (DOD 424).
• Telephone line powered
• Non-volatile memory (no batteries required)
• Programmable to dial up to 5 numbers on busy / ring no answer
• Blue off-hook LED indicator
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal, return to dial tone,
CPC, reorder tone, maximum call time out and programmable silence time out
• Selectable auto-answer feature for monitoring
• Extended temperature range (-30°F to 150°F)
• E-30 Flush mounts using the included rough-in box or surface mount using an
optional VE-5x5 surface mount box, sold separately (DOD 424)
• E-30-EWP and E-32-EWP are designed to meet IP66 Ingress Protection Rating
(see DOD 859 for more information)
• E-32 flush mounts in a standard double gang box (not included)
• Optional PB-1 Panic Button Kit (DOD 233)
• Also available with VoIP interface, see DOD 248 for more information
www.VikingElectronics.com
PRODUCT MANUAL
Handsfree Communication!
and
can
be
E-30 / E-30-EWP
Flush mount with the
Flush mount in a standard
included rough-in box
double gang electrical box
Non-ADA Hot-Line Phone for:
• Elevators
• Parking lots
Gate and Door Entry Phone for:
• Building lobbies
• Pedestrian gates
CAUTION - When installing on an analog extension of a phone system: Some phone systems do
not conform to analog telecom standards and might not be compatible with the E-30 or E-32 speaker
phones. For a detailed description of the telephone line specifications required for any of the E-30 or
E-32 phones, see DOD 869.
Note: Areas with loud background noise may require the push to talk version: E-30-PT or E-30-PT-EWP.
Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a
minimum loop current of 20mA loop. Loop current may be boosted on low current
lines with a Viking TBB-1B Talk Battery Booster (DOD 632).
Minimum Ring Voltage: 25VAC RMS
REN #: 0.5A
Dimensions: Overall: 5" x 5" x 2.25" (127mm x 127mm x 57mm)
Plastic Electrical Box: 4" x 4" x 2.12" (102mm x 102mm x 54mm)
Shipping Weight: 2.2 lbs (1 Kg)
Operating Temperature: -30°F to 15 0°F (-34°C to 65°C)
Humidity - E-30 / E-32: 5% to 95% non-condensing
Humidity - E-30-EWP / E-32-EWP: Up to 100% condensing
Connections: Gel-filled butt connectors
E-30 / E-30-EWP
E-32 / E-32-EWP
Handsfree Speaker
Phones with Dialers
December 13, 2018
E-32 / E-32-EWP
(not included)
Applications
• ATM machines
• Convention centers
• Residences
• Silent holdup alarm dialer
• Businesses
using optional Viking PB-1
Specifications
E-30 shown with optional
VE-5x5 Surface Mount Box
(sold separately)
• Stadiums
• Parking ramps
Advertisement
Table of Contents
Related Manuals for Viking E-32
Summary of Contents for Viking E-32
- Page 1 (not included) Models E-30-EWP and E-32-EWP add Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.
-
Page 2: Features Overview
VE-GNP Gooseneck Pedestal IMPORTANT: The E-30 will NOT mount to a standard double gang box. If your application requires a double gang box, see model E-32. Other pedestal options (2) 0.2 x 0.43 slots for available, see DOD# 424 (4) 0.38”... - Page 3 B . E-32 / E-32-EWP The E-32 is designed to be flush mounted to a standard double gang electrical box with minimum dimensions of: 3.65”W x 2.84”H x 2.25”D. Note: When mounting outside to rough or uneven surfaces (brick, stucco, etc.) apply a bead of clear silicone caulking around the top edge and sides of faceplate.
-
Page 4: Accessing The Programming Mode
When finished programming, move DIP switch 3 back to the ON position (see section H). Warning: Failure to do step 5 above will cause the E-30/32 phone to call Viking Technical Support instead of your programmed number. See Section G, Assisted Programming. -
Page 5: Speed Dial Numbers
C. Quick Programming Features Description Enter Digits Memory Location First speed dial number 0-20 digits then Second speed dial number 0-20 digits then Third speed dial number 0-20 digits then Fourth speed dial number 0-20 digits then Fifth speed dial number 0-20 digits then To add a Q at any point in the dialing string... -
Page 6: Miscellaneous Options
Touch Tone Silence Time Out Setting C - Silence Time Out Disabled 10 seconds This feature selects the length of time that calls will remain connected without voice 20 seconds activity. Programmable in increments of 10 seconds up to a maximum of 90 30 seconds seconds (Touch Tones 1 - 9). -
Page 7: Programming Examples
Viking technical support for assistance. With DIP switch 3 set to OFF (programming mode), pushing the CALL button will cause the E-30/32 phone to call Viking, whether it be connected directly to a CO line, or behind a "dial 9" PBX. -
Page 8: Warranty
TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.