Viking E-70-BK Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Entry Phones with Built-In 125KHz Proximity Card Reader
The E-70 Series entry phones are compact, weather and vandal resistant
speaker phones designed to provide two-way handsfree audio
communication. The E-70 also includes a built-in 125KHz proximity card
reader. The card reader outputs industry standard 26-bit Wiegand data,
allowing it to be used with a Viking ES-1 door controller or any controller
compatible with 26-bit Wiegand format. The E-70's compact size allows it
to be mounted in a standard double gang electrical box. The E-70 is
available in four different attractive finishes to match your door hardware,
light fixtures, etc. Replacement E-70 faceplates (PNL70) can be
purchased separately and are available in all four standard finishes. The
E-70 entry phones can share a single phone line with house or small
business telephones when used with a Viking model C-200, C-250, C-500
or C-2000B Entry Phone controller. The E-70 entry phones can also be
connected to an unused analog station port (programmed for ring down)
on a phone system or connected directly to a telephone line when used
with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-70 features
a built-in proximity card reader, microphone and speaker volume controls,
selectable auto answer for monitoring and intelligent call progress
detection for automatic hang-up when the call is completed. For outdoor
installations where the unit is exposed to precipitation or condensation,
the E-70 Series is available with Enhanced Weather Protection (EWP).
For more information on EWP, see DOD# 859.DOD# 859.
Features
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep
card read confirmation and EWP board protection
• Compact size: Front panel is the size of a typical single gang mid-size
wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25" deep x
3.65" wide x 2.84" tall minimum) or surface mounts in a Viking model
VE-5x5 (not included, see DOD# 424) for mounting on a wall, post or
VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 4 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Satin Black and Satin White
• PNL-70 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features: 18 gauge 304 stainless steel faceplate,
316 stainless steel push button, fiberglass reinforced plastic speaker
screen, scratch resistant powder coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket,mic
and speaker gasket, internally sealed (IP67) push button switch, self
draining mic mount and UV stable weather resistantpowder coating
(excluding E-70-SS 304 Stainless Steel faceplate)
• E-70-EWP is designed to meet IP66 Ingress Protection Rating (see
DOD# 859 for more information)
• Blue LED helps locate push button, indicate ringing and off hook
• Programmable intelligent call progress detection for automatic hang-up
on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• VE-LIGHT: Optional faceplate light kit for use with the VE-5x5
PRODUCT MANUAL
E-70-BK
"Textured Black"
(fine texture black
powder paint)
E-70-SS
"Brushed Stainless Steel"
(similar to brushed nickel) Shown with
optional VE-5x5 surface mount box
and VE-LIGHT kit (not included)
Applications
• Door or gate communication, business delivery entrances
• Use with any of Viking's Proximity Cards: PRX-C, PRX-C-ISO and
PRX-FOB (DOD# 198)
• Use with a Viking C-200 or C-250 to control E-70 on a single line
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-70's
and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-70's and door/gate
control on a single phone line
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when
used with a Viking SLP-1, SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable
ringdown capability
Specifications
Dimensions: Faceplate: 4.875" x 4.938" x 0.17" (123.8mm x 125.4mm
x 4.3mm), Phone: 2.84" x 1.8" x 1.65" (72mm x 46mm x 42mm)
Shipping Weight: 1.2 lbs (0.55 kg)
Operating Temperature: -30° F to 150° F (-34° C to 65° C)
Connections: (2) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
www.vikingelectronics.com
Information: (715) 386-8861
E-70 Series
Double Gang Entry Phone
with Built-In Proximity
Card Reader
January 11, 2017
E-70-BN
"Oil Rubbed Bronze"
(satin dark brown powder paint
with fine copper metallic)
E-70-WH
"Satin White"
(satin white
powder paint)