Viking E-75 Series Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Video Entry Phones with Built-In 125KHz Proximity Card Reader
The E-75 Series Video Entry phones are compact, weather and vandal
resistant speaker phones designed to provide two-way handsfree audio
communication and color composite video of who is at your door or gate.
The E-75 also includes a built-in 125KHz proximity card reader. The card
reader outputs industry standard 26-bit Wiegand data, allowing it to be used
with a Viking ES-1 door controller or any controller compatible with 26-bit
Wiegand format. The E-75's compact size allows it to be mounted in a
standard double gang electrical box. The E-75 is available in four different
attractive finishes to match your door hardware, light fixtures, etc.
Replacement E-75 faceplates (PNL75) can be purchased separately and
are available in all four standard finishes. The E-75 entry phones can share
a single phone line with house or small business telephones when used
with a Viking model C-200, C-250, C-500 or C-2000B Entry Phone
controller. The E-75 entry phones can also be connected to an unused
analog station port (programmed for ring down) on a phone system or
connected directly to a telephone line when used with a Viking K-1900-5
or K-1900-30 dialer. The E-75 features a built-in high resolution color video
camera, a built-in proximity card reader, microphone and speaker volume
controls, selectable auto answer for monitoring and intelligent call progress
detection for automatic hang-up when the call is completed. For outdoor
installations where the unit is exposed to precipitation or condensation,
the E-75 Series is available with Enhanced Weather Protection (EWP).
For more information on EWP, see DOD 859.
Features
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep
card read confirmation and EWP board protection
• Built-in high resolution color video camera with wide viewing angle, tilt/
swivel adjustments, and wide operating temperature of -30°F to 150°F
• Audio and video transmission on one CAT5E cable (see page 6)
• Compact size: Front panel is the size of a typical single gang mid-size
wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25" deep x
3.65" wide x 2.84" tall minimum) or surface mounts in a Viking model
VE-5x5 (not included, see DOD 424) for mounting on a wall, post or
VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 4 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Satin Black and Satin White
• PNL-75 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features: 18 gauge 304 stainless steel faceplate,
316 stainless steel push button, fiberglass reinforced plastic speaker
screen, scratch resistant powder coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic
and speaker gasket, internally sealed (IP67) push button switch, self
draining mic mount and UV stable weather resistant powder coating
(excluding E-75-SS 304 Stainless Steel faceplate)
• E-75-EWP is designed to meet IP66 Ingress Protection Rating (see
DOD 859 for more information)
• Blue LED helps locate push button, indicate ringing and off hook
• Programmable intelligent call progress detection for automatic hang-up
on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed
• VE-LIGHT: Optional faceplate light kit for use with the VE-5x5
PRODUCT MANUAL
E-75-BK
"Textured Black"
(fine texture black
powder paint)
E-75-SS
"Brushed Stainless Steel"
(similar to brushed nickel) Shown with
optional VE-5x5 surface mount box
and VE-LIGHT kit (not included)
Applications
• Door or gate communication, business delivery entrances
• Use with any of Viking's Proximity Cards: PRX-C, PRX-C-ISO and
PRX-FOB (DOD 198)
• Use with a Viking C-200 or C-250 to control E-75 on a single line
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-75's
and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-75's and door/gate
control on a single phone line
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when
used with a Viking SLP-1, SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable
ringdown capability
Specifications
Dimensions: Faceplate: 4.875" x 4.938" x 0.17" (123.8mm x 125.4mm
x 4.3mm), Phone: 2.84" x 1.8" x 1.65" (72mm x 46mm x 42mm)
Shipping Weight: 1.2 lbs (0.55 kg)
Operating Temperature: -30° F to 150° F (-34° C to 65° C)
Connections: (2) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
www.vikingelectronics.com
Information: 715-386-8861
E-75 Series
Double Gang Video
Entry Phones with Built-In
Proximity Card Reader
April 26, 2018
E-75-BN
"Oil Rubbed Bronze"
(satin dark brown powder paint
with fine copper metallic)
E-75-WH
"Satin White"
(satin white
powder paint)