Control / Operation; Connecting The Spray Lance To The Spray Gun; Switching On The Cleaner When It Is Connected To A Water Supply - Nilfisk-ALTO MC 5M Operating Instructions Manual

4 Control / Operation

4.1 Connecting the spray
lance to the spray gun
4.2 Switching on the
cleaner when it is
connected to a water
supply
Options / model variants
1)
Original instructions
A
B
NOTE!
Always remove any dirt from
the nipple before connecting the
spray lance to the spray gun.
O
NOTE!
Operate the spray gun several
times at short intervals to vent
the system.
The cleaner switches off auto-
matically after the spray gun has
been closed. To start the cleaner
again, operate the spray gun.
DSS-models switch off with a
delay of 20 seconds .
1)
1. Pull back the blue quick-
release grip (A) of the spray
gun.
2. Insert the nipple of the spray
lance (B) into the quick-
release connection and re-
lease the coupling (A).
3. Pull the spray lance (or other
accessory) forwards to check
that it is securely attached to
the spray gun.
1. Main switch
Turn the switch to position
" I ".
2. Unlock the spray gun and
operate it.
3. Lock the spray gun even dur-
ing short pauses.
MC 5M, MC 6P, MC 7P
13