Index 1 Safety precautions and warnings ...3 2 Description ...4 3 Before you start using your pressure washer ...5 4 Operating your pressure washe ...6 5 Fields of Application and Working Methods ...8 6 After using your pressure washe ...10 7 Maintenance ...11...
30 m Cable connections should be kept dry and off the ground. Mains power connection The following should be ob- served when connecting the high pressure washer to the electric installation: 2 Description 2.1 Application 2.2 Operation elements and model survey...
3 Before you start using your pressure washer 3.1 Mounting of trolley handle (models with trolley handle) 3.2 Mounting of hose reel handle 3.3 Mounting of quick coupling 1. Remove the label on top of machine. 2. Push down the trolley handle (12) into the machine.
3.4 Mounting of high pres- sure hose 4 Operating your pressure washer 4.1 Connection of high pres- sure hose 4.2 Mounting of spray lance and Click & Clean nozzles 1. Push the spray lance (6) into the spray gun (7) and screw it on.
Page 7
4.3 Water connection 4.4 Start and stop of the machine (when con- nected to a water supply) An ordinary 1/2" garden hose of min. 5 m and max. 25 m will be suitable. NOTE: Connection to the public mains according to regulations. The machine must not be operated while hanging on the wall hook!
Accessories and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt.
Page 9
5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfi sk-ALTO in association with accessories and detergents. Task Accessories ‘Click & Clean’...
6 After using your pressure washer 6.1 Storing the washer 6.2 Winding up of electric cable and high pressure hose The machine should be sto- red in a frost-free room! Pump, hose and accessories should always be emptied of water prior to storing as follows: 1.
The nozzle cleaning tool (d) and a Click & Clean brush (e) can also be stored on the product. The pressure washer can be stored on a wall on a special wall hook (not standard). Only mount the wall hook on a sturdy wall.
Page 12
7.1 Cleaning of water inlet fi lter 7.2 Cleaning of nozzle 7.3 Cleaning of machine vents 7.4 Greasing of couplings The machine should be kept clean so as to let cooling air pass freely through the ma- chine vents. To ensure an easy connec- tion and that o-rings do not dry up, the couplings should be greased regularly.
8 Trouble-shooting To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk- ALTO service organization: Symptom Cause Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Fluctuating pressure Pump sucking air Valves dirty, worn out or stuck Pump seals worn out...
Nilfi sk-ALTO guarantees high pressure washers for domestic use for 2 years. If your high pressure washer or ac ces so ries are handed in for repair, a copy of the receipt must be enclosed. Guarantee repairs are being...
Page 15
For removal of paint and rust. Sand available from do-it-your- self shops. Equipment for quick cleaning of patio/drive/fl agstones. Rotary brush for cleaning of wooden surfaces. Rotary brush for cleaning of wheel rims. For suspension of your high pressure washer on the wall. For cleaning vehicles and other surfaces.
For cleaning of grease and oil on motors for instance. Applied with an atomizer. For cleaning of wooden surfaces incl. of wooden garden furniture. High Pressure Washer Nilfi sk-ALTO C 120.1-6 / C 120.1-10 230 V 1~, 50 Hz - IP X5 EC Machine Directive 98/37/EC...