Nilfisk-ALTO MC 5M Operating Instructions Manual page 23

7.2.3 Changing the pump oil
Options / model variants
1)
Original instructions
B
C
NOTE!
Special pump oil is required
if the cleaner is used near food.
Please consult your
Nilfisk-ALTO dealer.
2. If necessary, add oil. Fill to
MAX level (B).
1. Before changing the oil, al-
low the cleaner to become
warm.
2. Remove cabinet.
3. Loosen and remove drain
plug (C).The plug magnet has
to be cleaned with a piece of
cloth/napkin to remove metal
particles. Drain the oil into a
suitable container(min.1 litre)
and dispose the oil in com-
pliance with regulations.
4. Fit drain plug and refill with
oil according to chapter 9.4
Technical Data.
5. Oil should be over the MIN.
level in the oil container at
level ground. Fill to MAX (B).
6. Fit the cabinet again.
MC 5M, MC 6P, MC 7P
23